Troubleshooting
English
56
Troubleshooting
Problem
Action
Does not drain and/or
spin.
•
Check the fuse or reset the circuit breaker.
•
Make sure the electrical voltage is normal.
•
Make sure the washing machine is plugged in.
•
Make sure the drain hose is pointed downward. (Natural
drain models only)
•
Make sure the drain hose is not clogged.
•
Make sure the drain hose is not kinked.
•
Straighten the drain hose. If there is a drain restriction, call
for service.
•
Close the door, and then press or tap
Start/Pause (Hold to
Start)
. For your safety, the washing machine will not spin
unless the door is closed.
Load is wet at the end of
the cycle.
•
Use the High or Extra High spin speed cycle. (Applicable
model only)
•
Use high efficiency (HE) detergent to reduce oversudsing.
•
The load is too small. Small loads (one or two items) may
become unbalanced and not spin completely.
Leaks water.
•
Make sure all hose connections are tight.
•
Make sure the water supply hoses' rubber washers are in
the correct position. Screw the hoses on tightly again. See
pages
22
through
24
.
•
Make sure the end of the drain hose is correctly inserted
and secured to the drain system.
•
Avoid overloading.
•
Use high efficiency (HE) detergent to prevent oversudsing.
•
Make sure the water supply hose is not kinked.
•
If the water supply pressure is too strong, water may leak.
Close the water tap a little.
•
Make sure water is not leaking from the water tap. If it is,
repair the water tap.
Excessive suds.
•
Use high efficiency (HE) detergent to prevent oversudsing.
•
Reduce the detergent amount for soft water, small loads,
or lightly soiled loads.
•
Don't use Non-HE detergent.
Untitled-10 56
Untitled-10 56
2023-06-22 5:32:12
2023-06-22 5:32:12
