background image

MANUAL FUNCTIONS

Possible to select the Function for each course. 
(Example) For a simple washing as the little dirt course : Power 

Select the little dirt course 

Wash 

Start/Hold

WASH ONLY

RINSE ONLY

SPIN ONLY

WASH AND RINSE

RINSE AND SPIN

- 10 -

1. Press the POWER 

button.

2. Press the WASH button.

• Adjust the washing time

with the wash button.

• Adjust by 2 minutes up to

6-30 minutes.  

• Possible to select the

soaking washing. 

3. Press the START/HOLD

button.
• Close the lid.

Notes
• After the washing cycle is done, water still remains in the spin

basket.  If you just want to drain the water, select the Spin
only.  

• Even though the water level is automatically selected, you can

select the water level manually depends on your laundry. 

• Adjust by 2 minutes up to1~15 minutes for the little dirt and wool

course. 

1. Press the POWER 

button.

2. Press the RINSE button.

• Select the number of

rinsing cycles with the
rinsing button.  

• Adjust up to 1-5 times.  

3. Press the START/HOLD

button.
• Close the lid.

Notes
• After the rinsing cycle is done, water still remains in the spin

basket. 

• Even though the water level is selected automatically, you can

select the water level manually if the laundry is already wet.  

1. Press the POWER 

button.

2. Press the SPIN button.

• Adjust the spinning time

with the spin button.  

• Adjust up to 1-9 minutes.  

3. Press the START/HOLD

button.
• Close the lid.

Notes
• If only spinning is selected, the selected spinning time and the

remaining washing time are indicated differently.  It is not a
machine problem since the total remaining time includes the
water draining time and stopping time.  

1. Press the POWER 

button.

2. Press the WASH and

RINSE button.
• Adjust the washing time

and number of rinsing
cycles. 

• Also possible to select

the soaking washing.  

3. Press the START/HOLD

button.
• Close the lid.

Notes
• After the rinsing cycle is done, water still remains in the spin

basket.  

1. Press the POWER 

button.

2. Press the RINSE and

SPIN button.
• Adjust the number of

rinsing cycles and
spinning time. 

3. Press the START/HOLD

button.
• Close the lid.

Summary of Contents for WA1151S

















Reviews: