Samsung VP-D361, Service Manual

Page: 14 / 254

3-2
Alignment and Adjustments
Samsung Electronics
[STEP 2]
Œ
Press and hold the "STOP" and "PB ZOOM" buttons on the video camera at the same time for more than
5 seconds.
´
When monitor OSD appears as shown Fig. 3-2, the adjustment mode has been activated successfully.
ˇ
Move the “ZOOM Lever” to highlight VCR ADJ and push the “PHOTO Button”.
¨
Monitor OSD shows Fig. 3-3.
Then VCR adjustment mode has been activated successfully.
[STEP 3]
In order to complete the adjustment the power must be reset.
This can be done by disconnecting and reconnecting the power source.
Fig. 3-2
Player Mode
Back
VCR ADJ
CAM ADJ
CAM DISP
LCDCVF AJD
DSP WRITE
VCRADJ
EPR EVR
800 OO OO
B:00000 R:00000
BER:0.0E+00
1394:OFF
AVIN:OFF
Indicates current adjustment item
Adjustment value
For Engineering Mode
Stored value
Fig. 3-3
3-1-2 VCR Adjustment
Œ
Get into VCR ADJUST mode.
´
Move to the VCR ADJUST address “858”.
ˇ
Play standard tape, and “Head Switching Position” will be adjusted automatically (within 5 Seconds).
Mode(Address) Name Value Description
858 SWP Position 80 Head Switching Position Adjust
<Table 3-2>
Note : This is the only electronic adjustment for the VCR.
Other addresses have already been assigned data during the manufacturing process.
We don’t need any adjustment for those addresses.