Samsung VP-D361, Service Manual

Page: 13 / 254

Samsung Electronics
3-1
3. Alignment and Adjustment
3-1 VCR Adjustment
3-1-1 Adjustment Preparation
1) Before you start
Œ
Use the buttons on the CAMCORDER when adjusting VCR.
´
When changing the adjustment item, please press the “EASY-Q” or “DISPLAY” buttons on the
CAMCORDER.
ˇ
The adjustment value can be changed by moving the “MENU Selector” Up or Down.
¨
Press the “MENU Selector” to store each adjustment into EEPROM.
ˆ
The OSD shows “OK” after finishing each adjustment step.
Ø
In order to exit the adjustment mode, disconnect the power source.
2) Function of each buttons on the Set Key
Buttons Description
PHOTO Button push (Confirm) Stores changed value in the adjustment and auto adjustment mode.
ZOOM Lever Right (Data Up)
Changes data in the adjustment state.
ZOOM Lever Left (Data Down)
EASY-Q (Mode Up)
Changes mode.
DISPLAY (Mode Down)
<Table 3-1>
3) How to get into the VCR adjust mode
[STEP 1]
Œ
Connect the Power source.
´
Set the Power Switch to “PLAY” position and Mode Switch to “TAPE” position.
Fig. 3-1
COLOR NIT
E
LIGH
T
MEN
U
DISPLAY
MACRO/PB ZOOM
Speaker
Mode Switch
Viewfinder
Color Nite
Light