EN
8
4. Troubleshooting
Problem: Cleaner won’t run
Problem : Poor job of dirt pickup
Possible Cause
Possible Solution
• Not firmly plugged in
• Plug unit in firmly
• No voltage in wall plug
• Check fuse or breaker
• Blown fuse or tripped breaker
• Replace fuse or reset breaker
Possible Cause
Possible Solution
• Full or clogged dust bag
• Change bag.
• Broken or worn belt
• Replace belt.
• Clogged hose or nozzle
• Clean hose or nozzle area.
• Hole in hose
• Replace hose.
• Dust bag improperly installed
• Properly install dust bag
• Incorrect carpet height setting
• Rotate nozzle control knob to lower setting
• Clogs in air flow passage
• Clear clogs.
Possible Cause
Possible Solution
• Bag improperly installed
• Re-install bag.
• Bag torn
• Replace bag
Check this list of possible problems and solutions before
bringing your vacuum to a service center.
Problem : Dust escapes the dust bag
Possible Cause
Possible Solution
• Strange sound like rushing air
• Check for clogs
Problem : Abnormal sound
Possible Cause
Possible Solution
• Incorrect carpet height setting
• Rotate nozzle control knob to lower setting
Problem : Cleaner hard to push
Summary of Contents for VAU-5200 Series
Page 1: ...DJ68 00075K REV 0 0 ...
