background image

EN

1

Fill in and retain

Index

Safety lnstructions

Warning:

The model and serial number are located on the bottom of the cleaner.

For your personal records, please enter the COMPLETE model and serial number
in the spaces provided and retain this information.

Your cleaner is model

and has serial number

It is suggested that you attach your sales receipt to this owner’s manual.
Verification of date of purchase may be required for warranty service of your
SAMSUNG product.

Thank you for purchasing a Samsung  vacuum cleaner. When using an electrical

appliance, basic precautions should always be followed, including the following:

To reduce the risk of fire, electric shock, or injury:

• 

Do not leave appliance unattended when plugged in. Unplug the vacuum from the 

outlet when it is not in use, or when it is being cleaned.

• 

Do not use outdoors or on wet surfaces.

• 

Do not allow to be used as a toy. Close attention is necessary when used by or 

near children.

• 

Use only as described in this manual. Use only manufacturer’s recommended 

attachments.

• 

Do not use with damaged cord or plug. If appliance is not working as it should, or 

has been dropped, damaged, left outdoors or dropped in water, take it to a 
service center.

• 

Do not pull or carry the vacuum by the cord, or use the cord as a handle. Do not     

close a door on cord, or pull the cord around sharp edges or corners. Do not run 
the appliance over its cord. Keep the cord away from heated surfaces.

• 

Do not unplug the vacuum by pulling on the cord. To unplug, grasp the plug, not 

the cord.

• 

Do not handle plug or appliance with wet hands.

• 

Do not put any object into vacuum openings. Do not operate with any opening

blocked:Keep free of dust, lint, hair and anything that may reduce air flow.

• 

Keep hair, loose clothing, fingers and all parts of body away from openings and 

moving parts.

• 

Do not use to pick up anything that is burning or smoking, such as cigarettes, 

matches or hot ashes.

• 

Do not use without dust bag and filters  in place.

• 

Turn off all controls before unplugging.

• 

Use extra care when cleaning on stairs.

• 

Do not use to clean up flammable or combustible liquids such as gasoline. Do not 

use the vacuum in areas where such liquids may be present.

• 

Store your cleaner indoors in a cool, dry area.

• 

Do not use extension cords or plug into an electrical outlet with inadequate 

current carrying capacity.

• 

Avoid vacuuming up sharp objects.

• 

Always turn this appliance off before connecting or disconnecting the hose, 

replacing bags, or removing the bottom plate for maintenance.

• 

Unplug electrical appliances before vacuuming them.

PLEASE READ ALL WARNINGS AND INSTRUCTIONS BEFORE USING THIS APPLIANCE

A

A

ssembling Parts 

Checking Parts
Attaching the Handle
Attaching the Hose and Tools
Assembled Vacuum Cleaner Parts

O

O

peration

ON-OFF switch
Handle positions
Transporting Cleaner
Carrying Handle
Cleaning Lightweight Flexible rugs
Cleaning Tool Attachments
Motor Protector Feature

M

M

aintenance

Replacing the Dust Bag
Cleaning the Filters
Replacing the Headlight
Replacing the Belt
Clearing Clogs

T

T

hermal Protector

T

T

roubleshooting

Save these instructions!

To reduce the risk of electrical shock, this appliance has a polarized plug with one
blade wider than the other. This plug will fit in a polarized outlet only one way. If the
plug does not fit in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to replace the outlet. Do not change the plug in any way.

2~3

3~4

4~7

7

8

Summary of Contents for VAU-5200 Series



















Reviews: