manualshive.com logo in svg
background image

© 2006 Matsushita Electric Industrial Co., Ltd. All
rights reserved. Unauthorized copying and distribu-
tion is a violation of law.

Order No VCB0605007CE

Vacuum Cleaner

MC-CG467/MC-CG467K
MC-CG465/MC-CG465K
MC-CG463/MC-CG463K
MC-CG461/MC-CG461K

Destination

: Europe

TABLE OF CONTENTS

PAGE

PAGE

1 Specifications

-----------------------------------------------------

2

2 Location of Controls and Components

-------------------

3

3 Troubleshooting Guide

-----------------------------------------

5

4 Disassembly and Assembly Instructions

----------------

6

4.1. Dust box cover assembly removal -------------------- 6
4.2. Separate the upper and lower body units ----------- 6
4.3. Printed circuit board AU removal ---------------------- 7
4.4. Motor removal ---------------------------------------------- 9
4.5. Cord reel partition unit replacement -----------------10
4.6. Rail base U replacement -------------------------------11
4.7. Spring-loaded cord reel pre-winding-----------------11
4.8. How to disassemble the turbine nozzle-------------11

5 Wiring Connection Diagram

---------------------------------

13

6 Exploded View and Replacement Parts List

-----------

14

6.1. EXPLODED VIEW (ATTACHME

N

TS)---------------14

6.2. PARTS LIST (ATTACHME

N

TS)-----------------------15

6.3. EXPLODED VIEW (BODY UNIT) --------------------16
6.4. PARTS LIST (BODY UNIT) ----------------------------17
6.5. PACKING INSTRUCTIONS----------------------------19
6.6. PACKING LIST--------------------------------------------20

Содержание MCCG467 - CANISTER VAC - MULTI LANGUAGE





















Отзывы: