14
ENG
When the television is initially powered on, several basic customer
settings proceed automatically and subsequently. The following
settings are available.
1
If the television is in Standby mode, press the
POWER
(
) button
on the remote control.
Result:
The
Plug & Play
is displayed.
2
To start the Plug & Play, press the
ENTER
button.
Result:
The
Language
menu is displayed.
3
Select the appropriate language by pressing the
†
or
…
button.
Press the
MENU
(
) button to confirm your choice.
Result:
The message
Antenna input check
is displayed.
4
Make sure that the antenna is connected to the TV.
Result:
After a little while, the
Country
menu is displayed.
5
Select your country by pressing the
▲
or
▼
button. Press the
MENU
(
) button to confirm your choice.
Result:
The
Auto Store
menu is displayed.
6
To start the channel store, press the
ENTER
button.
Result:
The search will end automatically. Channels are sorted
and stored in an order which reflects their position in the
frequency range (with lowest first and hialghest last).
➢
To stop the search before it has finished or return to normal
viewing, select the
Exit
and press the
ENTER
button
.
7
When searching and storing is complete, the
Time
menu is
displayed.
8
Press the
œ
or
√
button to move to the hour or minute. Set the
hour or minute by pressing the
▲
or
▼
button (refer to “Setting
the Current Date and Time” on page 32).
9
When the setting has finished all, the message
Enjoy viewing
your new TV
is displayed, and then the channel which has been
stored will be activated.
Plug and Play Feature
Auto Store
Country
: Belgie
Search
: 435.250MHz
Channel
Select
Adjust
Exit
Plug & Play
ENJOY YOUR WATCHING
P 1 C - - - - - - -
67.250 MHz 78
3 %
Ant. Input : Check
Exit
Time
Clock
- - : - -
Move
Exit
Language
English
Español
Deutsch
Português
Français
Italiano
Nederland
Sverige
Adjust
Select
Auto Store
Country
: Belgie
Search
: 435.250MHz
Channel
Select
Adjust
Exit
Exit
C18A_ENG_europe_17"_film 10/10/03 4:11 PM Page 14
