UP1500 User’s Manual
Chapter 3 Electrical, Environmental and Physical Data
UP1500 800-A1
3-3
3.2.1
Cerification
!
CE
The emmission tests were passed according to the EN 55022 Class-A.
The immunity tests were passed according tothe EN 55024.
!
FCC Part 15 Class A
Caution : Any changes or modifications in construction of this device which are
not expressly approved by the party responsible for compliance could voide
the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment gen-
erates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interface
to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interface in which case the user will be required to
correct the interference at his own expense.
!
VCCI Class A
Table 3-3
Environmental Requirements
Parameter
Specification
Operating temperature
+5°C to +35°C
(+41°F to +95°F)
Storage temperature
-35°C to +85°C
(-31°F to +185°F)
Relative Humidity
10% to 90%, with maximum wet bulb
temperature of 35°C (95°F) and
minimum dew point of 2°C (36°F)
Rate of (dry bulb)
temperature change
11°C/hr. ±2°C/hr.
(20°F/hr. ±4°F/hr.)
この裝置は
,
情報處理裝置等電波障害自主規制協議會
(VCCI)
の基準に基づく
クラス
A
情報技術裝置です
.
この裝置を家庭環境で使用すると電波妨害を引き
起こすことがあります
.
この場合には使用者が適切な對策を構ずるよう要求さ
れることがあります
.
