UP1500 User’s Manual
Chapter 5 Troubleshooting
51-0048-1B
5-4
5.2.3
Error Recovery Procedure
To clear the errors noted in section 5.2.1, take the following steps:
1. Power off the system.
2. Change the SW1 switch settings according to the error to be cleared.
3. Start the system.
4. Enter the proper parameters in SRM Console.
5. Load the Operating System.
6. Power off the system.
7. Restore the SW1 switches to their default positions.
8. Start the system.
Table 5-2
Switch Settings for Various Error Conditions
Error
Function
SW1 Switch:
1
2
Factory Default 800MHz
Boot under SRM
Console
On
On
Reload Firmware
Reload SRM Console
from FSB
Off
Off