UP1500 User’s Manual
Chapter 4 Software Support
UP1500 800-A1
4-11
date [<yyymmddhhmm.ss>]
Example 4-7 Date Command
>>>date
2:51:27 Jan 21, 2001
>>>date 200101210829.00
>>>date
8:29:02 Jan 21, 2001
4.2.5
Booting the Operating System
The
boot
command is used to boot the operating system.
Example 4-8 Boot Command
>>> b dka200
(boot dka200.2.0.7.1 -flags 0,0)
block 0 of dka200.2.0.7.1 is a valid boot block
reading 893 blocks from dka200.2.0.7.1
bootstrap code read in
base = 1fa000, image_start = 0, image_bytes = 6fa00
initializing HWRPB at 2000
initializing page table at 1fff0000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
The
boot
command initializes the processor, loads a program image from the
specified boot device, and transfers control to that image. The syntax is:
boot [-file filename] [-flags [value]] [-halt]
[-protocols enet_protocol] [boot_dev]
Table 4-6
Boot Command Options
Option
Description
-file filename
The boot file.
-flags [value]
Specifies additional information to the loaded image
or operating system.This qualifier overrides the
setting of the
boot_osflags
environment
variable. See the
boot_osflags
environment
variable on page 4-17 for a list of settings and their
meanings.
Notes: *The operator console is the monitor, keyboard, and mouse. This hardware is used to
enter SRM Console commands into the system.
