background image

Y

OUR

N

EW

TV 

4

C

HAPTER

O

NE

: Y

OUR

N

EW

TV

Learning about your new TV

Front panel jacks, buttons and indicators

2

EARPHONE jack (Option)

Connect a set of external earphones to this jack for private listening. 

2

VIDEO and AUDIO input jacks (Option) 

Use these jacks to connect a camcorder or video game.

3

MENU

Press to see an easy-to-use on-screen menu of your TV’s features.

4

– VOL and VOL +

Press to change the volume or to change features on the menu.

5

CH 

and CH 

Press to change channels or to select features on the menu.

6

Remote Control Sensor

Aim the remote control towards this spot on the TV.

7

STAND BY 

Lights up when you turn the power off.

8

POWER

Press to turn the TV on or off.

The front panel buttons control basic features, including the on-screen menu sys-
tem. To use the more advanced features, you will need the remote control.

Rear panel 

1

VIDEO and AUDIO input jacks

Use these jacks to connect a VCR or other video equipment.

2

VHF/UHF Antenna terminal

Use this terminal to connect an outdoor antenna or cable system.

For information on connecting equipment, please see page 10.

AA68-00569G(E)  7/15/02  4:56 PM  Page 9

Summary of Contents for TXH1372









































Reviews: