Memorizing the channels
Storing channels in memory
Your TV can memorize and store all of the channels you can receive.
Once these channels are in memory, you can use the
CH
▲
and
CH
▼
buttons to quickly scan through the available channels.
1
Press
MENU
repeatedly until you see the Setup menu.
Press VOL+. You will see a screen for selecting the kind of antenna
or cable system you connected. If you connected an antenna,
leave “Antenna” highlighted. If you connected cable, press
CH
▼
to highlight the type of cable you have: STD, HRC, or IRC.
✓
If you are not sure which type of cable system you have, contact your cable
company.
Press
VOL +
. The TV will begin memorizing all of the stations.
The TV cycles through the channel numbers and memorizes the
available channels. This takes one to two minutes. When the TV is
finished, it will display the “Memorize channels” screen.
✓
Press
MENU
at any time to interrupt the memorization process and return to
normal viewing.
4
Press
MENU
twice to clear the screen.
Adding and Erasing Channels
A channel can be manually added to or erased from memory.
1
Press
MENU
repeatedly until you see the Setup menu. Press
CH
▼
to highlight “Add/Erase.”
2
Press
VOL +
. You will see the Add/Erase menu screen.
TV O
PERATION
16
C
HAPTER
T
HREE
: TV O
PERATION
✓
CT-331FZ/CT-501EZ/CT-2038Z/CT-20F2N/CT-14F3N
models for military market has a “AFN” channel
instead of a “Cable IRC” channel.
As you press the
CH
▼
, the followings are select-
ed one after:
Antenna
➡
STD
➡
HRC
➡
AFN
➡
Antenna
AA68-00569G(E) 7/15/02 4:56 PM Page 21
