Connecting a camcorder (Option)
You can connect a camcorder to your TV, which enables you to view
camcorder tapes without a VCR.
✓
The audio and video cables mentioned in the steps below are usually included with
a camcorder. You can also purchase them at your local electronics store.
1
Locate the camcorder’s A/V output jacks on the camcorder.
2
Connect an audio cable to the camcorder’s AUDIO OUT terminal.
3
Connect the other end of the cable to the TV’s AUDIO IN terminal.
4
Connect a video cable to the camcorder’s VIDEO OUT terminal.
5
Connect the other end of the cable to the TV’s VIDEO IN terminal.
Installing batteries in the remote control
1
Pull the cover to the full to take it out
2
Install two AA size batteries. Make sure to match the + and
– ends of the batteries with the diagram inside the compartment.
3
Replace the lid.
✓
Remove the batteries and store them in a cool, dry place if you won’t be using the
remote control for a long time.
✓
The remote control can be used up to about 23 feet from the TV.
✓
Batteries last for about one year.
13
C
HAPTER
T
WO
: I
NSTALLATION
I
NSTALLATION
AA68-00569G(E) 7/15/02 4:56 PM Page 18
