Samsung TB14C52S/XEC, Service Manual

Page: 17 / 106

Alignments and Adjustments (Mechanical)
Samsung Electronics 4-9
4-2-11 Assembly of Gear Loading Drive,
Slider Cam, Lever T, S Load Ass’y
1. When reinstalling, be sure to align dot of Lever T
Load AssÕy
Œ
with dot of Lever S Load AssÕy
´
as shown in drawing. (Refer to Timing Point 1
2. Insert the Pin A, B, C, D into the Slider Cam
ˇ
hole.
3. Be sure to align dot of Lever T Load AssÕy and dot
of Gear Loading Drive
¨
. (Refer to Timing Point 2)
4. Align dot of Gear Loading Drive with mark of
Slider Cam as shown in drawing.
(Refer to Timing Point 3)
´
LEVER S LOAD ASS'Y
Œ
LEVER T LOAD ASS'Y
PIN A
PIN C PIN B
PIN D
LEVER T
LOAD ASS'Y
LEVER S
LOAD ASS'Y
ˇ
SLIDER CAM
¨
GEAR LOADING DRIVE
TIMING POINT 1
TIMING POINT 2
TIMING POINT 3
4-2-12 Lever Tension Ass’y, Band Brake
Ass’y, Sleeve Tension Removal
1
.
Remove the Spring Tension
Œ
.
2
.
In bottom side of Deck, remove the Sleeve
Tension
´
after rotating it right or left as lif-
tinig locking edge of Sleeve Tension.
3
.
Remove the side ÒaÓ of the Band Brake
AssÕy
¨
in the direction of arrow ÒAÓ from
the Lever Tension AssÕy
ˇ
.
4
.
Remove the side ÒbÓ of the Band Brake
AssÕy
¨
in the direction of arrow ÒBÓ from
the Main Base.
Note :
1
.
When replacing the Lever Tension AssÕy, be
sure to apply oil in the Sleeve Tension.
2
.
Take care not to touch stain on the felt side,
and not to be folded and broken Band Brake
AssÕy.
¨
BAND BRAKE ASS'Y
´
SLEEVE TENSION
ˇ
LEVER TENSION ASS'Y
Œ
SPRING TENSION
"A"
"B"
a
b
Fig. 4-14 Assembly of Gear Loading Drive,
Slider Cam, Lever T, S Load Ass’y
Fig. 4-15 Lever Tension Ass’y, Band Brake Ass’y, Sleeve Tension
Removal