Samsung TB14C52S/XEC, Service Manual

Page: 15 / 106

Alignments and Adjustments (Mechanical)
Samsung Electronics 4-7
4-2-7 Assembly of Gear FL Cam,
Gear Joint 1, 2
1. Be sure to align dot mark of Gear Joint 1
Œ
with
dot mark of Gear Joint 2
´
as shown Fig. 4-10
(Refer to Timing Point 1), confirm the Timing
Point 2 of the Gear Joint 2
´
and Slider Cam
ˇ
.
2. Align the Gear FL Cam
¨
with the Gear Worm
Wheel Post as shown detail drawing. (Refer to
Timing Point 3)
Œ
GEAR JOINT 1
´
GEAR JOINT 2
ˇ
SLIDER CAM
TIMING POINT 1
¨
GEAR FL CAM
GEAR WORM WHEEL
POST
TIMING POINT 2
TIMING POINT 3
4-2-8 Holder Worm, Gear Worm,
Gear Worm Wheel Removal
1. Release the Hook [A] in the direction of arrow
and, remove the Holder Worm
Œ
.
2. Remove the Gear Worm
´
.
3. Remove the Gear Worm Wheel
ˇ
. (After remov-
ing the Gear FL Cam as shown Fig. 4-9)
Note : Secure the Hook [A] after installing the
Holder Worm
Œ
.
Œ
HOLDER WORM
´
GEAR WORM
HOOK [A]
ˇ
GEAR WORM WHEEL
Fig. 4-10 Assembly of Gear FL Cam, Gear Joint 1,2
Fig. 4-11 Holder Worm, Gear Worm, Gear Worm Wheelemoval