14
English
Connections
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the mains and antenna.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWEr
P
button.
Plug & Play
is available only when the Input
Source
is set to
TV
.
✎
Before turning on the TV, make sure the antenna cable is connected.
1
Selecting the OSD Language.
Press the
▲
or
▼
button, then press the
ENTEr
E
button. Select the desired
OSD (On Screen Display) language.
2
Setting up the
Network
Set up your network connection. Press the
ENTEr
E
button to start. If you do not
know your network set up information or want to set to it later, select
Skip
. You can
set up the network connection later using the
Network
menu.
✎
When network connection settings are complete, Software Upgrade is
available. Select Next to upgrade TV software. Your TV will automatically
upgrade, if your TV need a software upgrade. If you want to upgrade later,
select the
Skip
.
3
Selecting the usage mode
Press the
▲
or
▼
button to select
Home use
, and then press the
ENTEr
E
button twice.
y
Select the
Home use
mode.
Store Demo
mode is for retail environments.
4
Select Country
Press the
▲
or
▼
button, then press the
ENTEr
E
button. Select the
appropriate country.
5
Setting the
Clock Mode
Press the
▲
or
▼
button to select
auto
or
Manual
, then press the
ENTEr
E
twice.
✎
If you selected
Manual
, you’ll go to the
Date
and
Time
screen. Select
Date
or
Time
, and then press
ENTEr
E
. Then, use the number buttons or the
▲
or
▼
button to set the date or time. Use the
◄
or
►
button to move
between entry fields. When done setting the
Date
and
Time
, select
Next
,
and then press
ENTEr
E
6
Selecting search options for auto
tuning
Press the
▲
or
▼
button, then press the
ENTEr
E
button. Select the channel
source to memorise. When setting the antenna source to
Cable
, a step appears
allowing you to assign numerical values (channel frequencies) to the channels. For
more information, refer to
Channel
→
auto Tuning
.
✎
Press the
ENTEr
E
button at any time to interrupt the memorisation
process.
7
Enjoy your TV.
If you want to watch a broadcast programme, select
Close
. If you want to enjoy
the
Smart Hub
, select the
Smart Hub
.
If You Want to reset This Feature...
Select
System - Plug & Play
(Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0"(except France).
If you want to change the PIN number, use the
Change PIN
function.
You should do
Plug & Play
(
MENu
→
System
) again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets
the PIN to “0-0-0-0”(France: “1-1-1-1”):
POWEr
(off)
→
MuTE
→
8
→
2
→
4
→
POWEr
(on).
Connections
ANT IN
DC 14V
TA750
TA950
Cable
ANT OUT
Power Input