22
Installing the Wall Mount
Preparing before installing Wall-Mount
To install a wall-mount from another manufacturer,
use the Holder-Ring.
1
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the product on the wall.
For detailed information on installing the wall mount, see the instructions provided with the
wall mount. We recommend you contact a technician for assistance when installing the wall
mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or
others if you elect to install the wall mount on your own.
Wall Mount Kit Specifications (VESA)
NOTE
Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall
mount to surfaces other than plaster board, please contact your nearest dealer for additional
information. If you install the product on a ceiling or slanted wall, it may fall and result in
severe personal injury.
NOTE
•
Standard dimensions for wall mount kits are shown in the
table below.
•
Samsung wall mount kits contain a detailed installation
manual and all parts necessary for assembly are provided.
•
Do not use screws that do not comply with the VESA
standard screw specifications.
•
Do not use screws that are longer than the standard length or
do not comply with the VESA standard screw specifications.
Screws that are too long may cause damage to the inside of
the product.
•
For wall mounts that do not comply with the VESA standard
screw specifications, the length of the screws may differ
depending on the wall mount specifications.
• Do not fasten the screws too firmly.
This may damage the product or cause the product to fall,
leading to personal injury.
Samsung is not liable for these kinds of accidents.
• Samsung is not liable for product damage or personal injury
when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
•
Do not mount the product at more than a 15 degree tilt.
•
Always have two people mount the product on a wall.
VESA SCREW HOLE SPECS
(A * B) IN MILLIMETERS
STANDARD SCREW
QUANTITY
600 X 400
M8
4
Do not install your Wall Mount Kit while your product is turned on.
It may result in personal injury due to electric shock.
When the product is installed vertically, do not use portrait orientation.
Preparation
