GB-9
PATTERN movement
This function is to view the camera movement for 30 seconds desig-
nated by the user on the pattern mode of the camera menu. Press the
pattern button on the keyboard, enter the pattern number(1~3) you
want, and press “ENTER” to execute PATTERN movement.
“PATTERN 1” will appear on the screen.
• If there is any of MANUAL (PAN, TILT, ZOOM, FOCUS) input during auto
execution (SCAN, AUTO PAN, PATTERN), the system will stop the AUTO
movement and execute the MANUAL movement.
PRESET movement
Press the preset key on the keyboard to start PRESET POSITION
movement.
The screen will appear as shown below.
PRESET position movement
1. Enter the preset number you want to operate.
2. Press “ENTER” key.
PRESET programming
This function is to set the camera screen the user wants to call and
monitor whenever he/she wants to.
Maximum 128 screens can be preset. (0~127)
1. Move the camera to the position you want by using a joystick and
camera lens key.
2. Press “SAVE”.
3. When a window appears as shown below, enter the preset number
you want to save and press “ENTER”.
PRESET DELETE
This function is to delete the preset position.
1. Press “DELETE”.
2. When a window appears as shown below, enter the preset number
you want to delete and press “ENTER”.
3. The camera will move to the preset position you want to delete.
The system keyboard will show a message to confirm the deletion.
Press “OK” to delete or “CANCEL” to cancel the order.
Clear PRESET mode
Press “EXIT” on the right below to go out of the PRESET mode.
It will return to the camera control mode.
CAMERA TITLE input
You can title the selected camera.
Press the camera title line to call the title input page on the screen.
