Samsung SRP-350U, Service Manual

Page: 80 / 125

Command
Samsung Electro-Mechanics 8-17
GS h n
[Name]
[Format]
[Range]
[Description] Set bar code height.
ASCII GS f n
Hex 1D 68 n
Decimal 29 104 n
1
≤ n ≤ 255
Set the height of the bar code.
n specifies the number of dots in the vertical direction.
①
GS k m d1…dk NUL ,
②
GS k m n d1…dn
[Name]
[Format]
[Range]
[Description] Print bar code.
①
ASCII GS k m d1…dk NUL
Hex 1D 6B m d1…dk 00
Decimal 29 107 m d1…dk 0
②
ASCII GS k m n d1…dn
Hex 1D 6B m n d1…dn
Decimal 29 107 m n d1…dn
①
0 ≤ m ≤ 6 (k and d depends on the bar code system used.)
②
65 ≤ m ≤ 73 (n and d depends on the bar code system used.)
Selects a bar code system and prints the bar-code.
m selects a bar ode system as follows :
m Bar Code System Number of Characters Remarks
0 UPC-A 11 ≤ k ≤ 12 48 ≤ d ≤ 57
1 UPC-E 11 ≤ k ≤ 12 48 ≤ d ≤ 57
2 JAN13(EAN13) 12 ≤ k ≤ 13 48 ≤ d ≤ 57
3 JAN8(EAN8) 7 ≤ k ≤ 8 48 ≤ d ≤ 57
4 CODE 39 1 ≤ k
48 ≤ d ≤ 57,
65 ≤ d ≤ 90, 32, 36, 37, 43, 45, 46, 47
5 ITF 1 ≤ k (even number) 48 ≤ d ≤ 57
①
6 CODABAR 1 ≤ k
48 ≤ d ≤ 57,
65 ≤ d ≤ 68, 36, 43, 45, 46, 47 ,58
65 UPC-A 11 ≤ n ≤ 12 48 ≤ d ≤ 57
66 UPC-E 11 ≤ n ≤ 12 48 ≤ d ≤ 57
67 JAN13(EAN13) 12 ≤ n ≤ 13 48 ≤ d ≤ 57
68 JAN8(EAN8) 7 ≤ n ≤ 8 48 ≤ d ≤ 57
69 CODE 39 1 ≤ n ≤ 255
48 ≤ d ≤ 57,
65 ≤ d ≤ 90, 32, 36, 37, 43, 45, 46, 47
d1 = dk = 42(1)
70 ITF
1 ≤ n ≤ 255 (even
number)
48 ≤ d ≤ 57
71 CODABAR 1 ≤ n ≤ 255
48 ≤ d ≤ 57,
65 ≤ d ≤ 68, 36, 43, 45, 46, 47 ,58
72 CODE 93 1 ≤ n ≤ 255 0 ≤ d ≤ 127
②
73 CODE 128 1 ≤ n ≤ 255 0 ≤ d ≤ 127
GS r n
[Name]
[Format]
[Range]
[Description] Transmit status.
ASCII GS V n
Hex 1D 72 n
Decimal 29 114 n
n = 1, 2, 49, 50
Transmits the status specified by n as follows.