Samsung SRP-350U, Service Manual

Page: 66 / 125

Command
Samsung Electro-Mechanics 8-3
DLE ENQ n
[Name]
[Format]
[Range]
[Description] Real-time request to printer.
ASCII DLE ENQ n
Hex 10 05 n
Decimal 16 5 n
1
≤ n ≤ 2
Recovers from an error and restart printing from the line where the error occurred.
ESC FF
[Name]
[Format]
[Description] Print data in page mode.
ASCII ESC FF
Hex 1B 0C
Decimal 27 12
In page mode, prints all buffered data in the printing area collectively.
ESC SP n
[Name]
[Format]
[Range]
[Description] Set right-side character spacing.
ASCII ESC SP n
Hex 1B 20 n
Decimal 27 32 n
0
≤ n ≤ 255
Sets the character spacing for the right side of the character to
[n ×horizontal or vertical motion units].
ESC ! n
[Name]
[Format]
[Range]
[Description] Select print modes.
ASCII ESC ! n
Hex 1B 21 n
Decimal 27 33 n
0
≤ n ≤ 255
Selects print mode(s) using n as follows.
Bit Off/On Hex Decimal Function
Off 00 0 Character font(12 ×24) selected. 0
On 01 1 Character font(9 ×17) selected.
1,2 - - - Undefined.
Off 00 0 Emphasized mode not selected. 3
On 08 8 Emphasized mode selected.
Off 00 0 Double-height mode not selected. 4
On 10 16 Double-height mode selected.
Off 00 0 Double-width mode not selected. 5
On 20 32 Double-width mode selected.
6 - - - Undefined.
Off 00 0 Underline mode not selected. 7
On 80 128 Underline mode selected.
ESC $ nL nH
[Name]
[Format]
[Range]
[Description] Set absolute print position.
ASCII ESC $ nL n
Hex 1B 24 nL n
Decimal 27 36 nL n
0
≤ n ≤ 255
0 ≤ n ≤ 255
Set the distance from the beginning of the line to the position at which subsequent characters are to be
printed.
* The distance from the beginning of the line to the print position is
[(nL + nH ×256) ×(vertical or horizontal notion unit)] inches.