Samsung SRP-350PG - SRP 350 B/W Direct Thermal..., Service Manual

Page: 64 / 125

Command
Samsung Electro-Mechanics 8-1
8. Control Commands
HT
[Name]
[Format]
[Description] Horizontal tab.
ASCII HT
Hex 09
Decimal 9
Moves the print position to the next horizontal tab position.
LF
[Name]
[Format]
[Description] Print and line feed.
ASCII LF
Hex 0A
Decimal 10
Prints the data in the print buffer and feeds one line based on the current line spacing.
FF
[Name]
[Format]
[Description] Print and return to standard mode in page mode.
ASCII FF
Hex 0C
Decimal 12
Prints the data in the print buffer collectively and returns to standard mode.
CR
[Name]
[Format]
[Description] Print and carriage return.
ASCII CR
Hex 0D
Decimal 13
When automatic line feed is enabled, this command functions the same as
LF : when automatic line feed is disabled, this command is ignored.
CAN
[Name]
[Format]
[Description] Cancel print data in page mode.
ASCII CAN
Hex 18
Decimal 24
In page mode, deletes all the print data in the current printable area.
DLE EOT n
[Name]
[Format]
[Range]
[Description] Real-time status transmission.
ASCII DLE EOT n
Hex 10 04 n
Decimal 16 4 n
1
≤ n ≤ 4
Transmits the selected printer status specified by n in real-time, according to the following parameters :
n = 1 : Transmit printer status.
n = 2 : Transmit off-line status.
n = 3 : Transmit error status. n = 4 : Transmit paper roll sensor status.