Samsung SRP-350PG - SRP 350 B/W Direct Thermal..., Service Manual

Page: 74 / 125

Command
Samsung Electro-Mechanics 8-11
FS q n [xL xH yL yH d1…dk]1…[xL xH yL yH d1…dk]n
[Name]
[Format]
[Range]
[Description] Defined NV bit image.
ASCII FS q n [xL xH yL yH d1…dk]1…[xL xH yL yH d1…dk]n
Hex 1C 71 n [xL xH yL yH d1…dk]1…[xL xH yL yH d1…dk]n
Decimal 28 113 n [xL xH yL yH d1…dk]1…[xL xH yL yH d1…dk]n
1
≤ n ≤ 255
0 ≤ xL ≤ 255
0 ≤ xH ≤ 3 (when 1 ≤ (xL + xH ×256) ≤ 1023
0 ≤ yL ≤ 3 (when 1 ≤ (xL + xH ×256) ≤ 288
1 ≤ d ≤ 255
k = (xL + xH ×256) ×(yL + yH ×256) ×8
Total defined data area = 2M bits (256K bytes)
Define the NV bit image specified by n.
* n specifies the number of the defined NV bit image.
* xL, xH specifies (xL + xH ×256) ×8 dots in the horizontal direction
for the NV bit image you are defining.
* yL, yH specifies (yL + yH ×256) ×8 dots in the vertical direction
for the NV bit image you are defining.
GS ! n
[Name]
[Format]
[Range]
[Description] Select character size.
ASCII GS ! n
Hex 1D 21 n
Decimal 29 33 n
0
≤ n ≤ 255
(1 ≤ vertical number of times ≤ 8, 1 ≤ horizontal number of times ≤ 8)
Selects the character height using bits 0 to 2 and selects the character width using bits 4 to 7, as
follows :
Bit Off/On Hex Decimal Function
0-3 Character height selection. See Table 2
4-7 Character width selection. See Table 1
Table 1
Character Width Selection
Table 2
Character Height Selection
Hex Decimal Width Hex Decimal Height
00 0 1 (normal) 00 0 1 (normal)
10 16 2 (double-width) 10 16 2 (double-width)
20 32 3 20 32 3
30 48 4 30 48 4
40 64 5 40 64 5
50 80 6 50 80 6
60 96 7 60 96 7
70 112 8 70 112 8
GS $ nL nH
[Name]
[Format]
[Range]
[Description] Set absolute vertical print position in page mode.
ASCII GS $ nL nH
Hex 1D 24 nL nH
Decimal 29 36 nL nH
0
≤ nL ≤ 255, 0 ≤ nH ≤ 255
* Sets the absolute vertical print starting position for
buffer character data in page mode.
* This command sets the absolute print position to
[(nL + nH ×256) ×(vertical or horizontal motion unit)] inches.