Samsung SRP-350PG - SRP 350 B/W Direct Thermal..., Service Manual

Page: 42 / 125

2
Control Board
1
Screw (3x8)
13
Plate-Spring
3
14
Screw (3x8)
11
Screw (3x8)
6
Screw (3x8)
8
Push Button
7
Button Assy
10
Guide Button
12
Cover Sensor PCB
9
Spring
Release
5
Lever Release
4
Washer
Slip
Frame Main
4-8
4-3 Frame Block
4 Disassembly and Assembly
Figure 4-14 Disassembly Frame #5
Figure 4-15 Disassembly Frame #6
1. Remove the screw 1 . And separate the
Control-Board 2 from the Frame-Main 3 .
2. Remove the washer slip 4 .
3. Separate the Lever-Release 5 from the
Frame-Main 3 .
4. Remove the two screw 6 .
5. Separate the Button Assembly 7 from the
Frame-Main 3 .
6. Push the Button 8 . Then, the Button
Assembly is separated (Internal Spring
Release 9 , Guid-Button 10 ).
7. Remove the screw 11 . And separate the
Cover-Sense PCB 12 from the Frame-
Main 3 .
8. Remove the screw 14 . And separate the Plate-
Spring 13 from the Frame-Main 3 .
Spring Hook 1
Brkt-Hook
4
2
Screw (3x4.4)
3
Samsung Electro-M
e
chanics
1. Remove the screw
4
in the Frame-Main
1
(3PCS).
2. Separate the Knob paper End
2
.
3. Separate the Housing paper End
3
(2PCS).
4. Separate the Sub-Board
5
(2PCS).
5. Remove the Washer slip
6
. And Separate the
Gear - Idle
7
from the Frame Main
1
.
6. Remove the two Screw
8
. And Separate the
Motor STEP
9
from the Frame -Main
1
.