Samsung SRD-842 User Manual Download Page 112

Page: 112 / 145

112_

web viewer

•

If Microsoft Silverlight plug-in is already installed

Use a web browser to connect to the DVR.

If Silverlight plug-in is already installed, you will see the
login screen as shown.

If the login screen does not appear, check if the DVR set is
connected properly with a valid IP address.

If automatic proxy is activated and an invalid DNS server is specified while configuring network, the Internet access
may not be available.

For more details on using the Web Viewer, please refer to “

Connecting Web Viewer (Windows)

”. (Page 86)

USING LIVE VIEWER (Mac)

The Live Viewer screen consists of following :

Functions

Name, Address

Displays a connected DVR’s IP address and model name.

Menu Selection

Consists of <

LIVE

> and <

ABOUT

> menu.

Split Mode Selection

These buttons are used for the screen split and full screen mode.

Supports up to a maximum of 9 channels due to performance constraints of Silverlight.

c
d
e

g
h

Summary of Contents for SRD-842


















































































































































Search results

Summary of Contents for SRD-842

Reviews:

Related manuals for SRD-842

Brands by name

Popular brands

Samsung SRD-842, User Manual

Search results

Summary of Contents for SRD-842

Reviews:

Related manuals for SRD-842

Brands by name

Popular brands