Samsung SRD-842 User Manual Download Page 89

Page: 89 / 145

English

_89

●

WEB VIEWER

Functions

PTZ

Controls connect PTZ camera(s).

OSD Menu

Goes to the relevant menu screen of a camera, which supports OSD menu and changes
the menu.

Display Pane

Displays the video of camera connected to DVR.

Logout

Performs logout process.

Displays the connected user ID.

OSD Information Display

The channel number of the connected DVR are displayed.

Either the <

DVR Time

> or the <

PC Time

> will be displayed as the

current date and time, according to your configuration.

It displays whether the PTZ controls are active.

Shows Audio On/Off status.

Alarm icon appears when alarm is issued.
It disappears when pressed the [

ALARM

] button of the DVR.

Motion icon appears when a motion is detected.

Tampering icon appears when a tampering is detected.

Shows the recording status.

If you have set PTZ cameras for the DVR, “

PTZ

” is displayed on the

screen. Select a PTZ camera channel and use the [

PTZ

] button for

camera control.

Connected DVR

This displays the IP address and the status of the connecting
DVR.

Connection failure message

No Response

: Appears when the DVR does not respond.

Access Denied

: Appears when the maximum number of

users is exceeded.

The number of simultaneous connections are limited to 10.

Setting the Display of the OSD Time Information

Select <

DVR Time

> or <

PC Time

> for the OSD time

information display setting.

•

DVR Time

: Based on the time of the connected DVR

•

PC Time

: Based on the time of the PC currently running

the Web Viewer.

c d e f g h

Summary of Contents for SRD-842


















































































































































Search results

Summary of Contents for SRD-842

Reviews:

Related manuals for SRD-842

Brands by name

Popular brands

Samsung SRD-842, User Manual

Search results

Summary of Contents for SRD-842

Reviews:

Related manuals for SRD-842

Brands by name

Popular brands