Samsung SRD-842 User Manual Download

Page: 114 / 145

114_

web viewer

MOBILE VIEWER

What is Mobile Viewer?

Mobile Viewer is management software that enables you to connect
to DVR (Digital Video Recorder) remotely and control the video
playback and PTZ operations (if configured) in real time.

Key Features

•

Remote access via Smart phone

•

Voice Recognition

•

1-split and 4-split modes supported in Live Viewer

•

Supports single channel search function

•

Switch channels using the touch-sensitive LCD panel

•

PTZ camera operations supported
(complies with the protocol of the connected DVR)

•

Up to 16 channels supported

Compatible Smartphone

This application is optimized for

•

iOS v5.1, v6.0, v6.1 (iPhone 4/5, iPad 3/4)

•

Android OS v2.3, v4.0, v4.1 (Galaxy S2/S3, Galaxy Note)

For more information, refer to the user manual.
(http://www.samsungcctv.com)

2.X

20xx. xx. xx

Summary of Contents for SRD-842


















































































































































Search results

Summary of Contents for SRD-842

Reviews:

Related manuals for SRD-842

Brands by name

Popular brands

Samsung SRD-842, User Manual

Search results

Summary of Contents for SRD-842

Reviews:

Related manuals for SRD-842

Brands by name

Popular brands