Samsung SRD-473D User Manual Download Page 30

Page: 30 / 142

30_

live

AUDIO ON/OFF

You can turn the sound on/off corresponding to the channel in Live mode.

AUDIO ON/OFF in Single mode

Click the audio icon (

) on the screen, or press the [

AUDIO

] button on the front panel or the remote control

to turn it on/off.



Only the channel where <

Audio

> is set to <

> in “

Device

Camera

” displays the audio icon (

) in Live mode that

you can use to turn the sound on/off.

FREEZE

This is available only in Live mode, this pauses playing the Live image temporarily.

Press the [

FREEZE

] button on the front panel or the remote control, or click <

> in the launcher menu.

The playback of the image is stopped temporarily.



Sound continues to play during the pause.

Press the [

FREEZE

] button again, or click <

This will release the freeze.

Summary of Contents for SRD-473D















































































































































Search results

Summary of Contents for SRD-473D

Reviews:

Related manuals for SRD-473D

Brands by name

Popular brands

Samsung SRD-473D, User Manual

Search results

Summary of Contents for SRD-473D

Reviews:

Related manuals for SRD-473D

Brands by name

Popular brands