Samsung SRD-473D User Manual Download Page 110

Page: 110 / 142

110_

web viewer

USING LIVE VIEWER (Mac)

The Live Viewer screen consists of following :

Functions

Name, Address

Displays a connected DVR’s IP address and model name.

Menu Selection

Consists of <

Live

> ,<

About

> and <

LOGOUT

> menu.

Split Mode Selection

These buttons are used for the screen split and full screen mode.



Supports up to a maximum of 9 channels due to performance constraints of Silverlight

Name, Address

Displays a connected DVR’s IP address and model name.

Audio

Sets the sound connected to each channel to ON/OFF.

DVR Time, PC Time

Select <

DVR Time

> or <

PC Time

> for the OSD time information display setting of the Live

Viewer.

Change Channel

Switches into previous/next channel or perform Auto Sequence.
Click Auto Sequence button to display the Time Interval Selection menu.

CAPTURE

Saves current video for selected channel in designated path.

Prints current video image for selected channel through designated printer.

RECORD

Starts and stops recording.
If you cannot play the file recorded from the web, please install the H.264 CODEC.
ex) MAC: perian_1.2.3.dmg (http://perian.org)

Summary of Contents for SRD-473D















































































































































Search results

Summary of Contents for SRD-473D

Reviews:

Related manuals for SRD-473D

Brands by name

Popular brands

Samsung SRD-473D, User Manual

Search results

Summary of Contents for SRD-473D

Reviews:

Related manuals for SRD-473D

Brands by name

Popular brands