background image

English

 

_21

 

LIVE

 

J

 

The initial administrator ID is “

admin

” and the password should be set when logging in for the first time.

 

Set password for your wireless network if you use the product with a wireless router. Being not protected with password or 
using the default wireless router password may expose your video data to potential threat.

 

Please change your password every three months to safely protect personal information and to prevent the damage of the 
information theft.
Please, take note that it’s a user’s responsibility for the security and any other problems caused by mismanaging a 
password.

Locking All Buttons

This will restrict access to all buttons available in the DVR.

1. 

In Live mode, press buttons in the order of [

STOP (

@

)

]

[

FREEZE

]

[

STOP (

@

)

]

[

FREEZE

]

[

MENU

].

<

All Key Lock

> confirmation window appears.

2. 

Select <

OK

>.

All keys are locked.

3. 

In the lock condition, press any button to display a dialog 
where you are prompted to enter the password for 
unlocking the buttons.
The button lock will be released if you enter the admin 
password.

2014-01-01 01:10:25

All Key Lock

Are you sure to all key lock?

 OK 

Cancel

Summary of Contents for SRD-473D















































































































































Reviews: