Samsung SRD-443 User Manual Download Page 74

Page: 74 / 171

74_

web viewer

CONNECTED DVR

This displays the IP address and the status of the connecting DVR.



Connection failure message

No Response

: Appears when the DVR does not respond.

Access Denied

: Appears when the maximum number of users is exceeded.



The number of simultaneous connections are limited to 4.

Setting the display of the OSD time information

Select <

DVR Time

> or <

PC Time

> for the OSD time information display

setting.

•

DVR Time

: Based on the time of the connected DVR

•

PC Time

: Based on the time of the PC currently running the Web Viewer.

•

Audio

: Sound On/Off

CHANGING THE LIVE SCREEN MODE



In the 4-split screen mode, “

SEQUENCE

”, “

” and “

” buttons will be

deactivated.

•

SEQUENCE

: When this button is clicked, screens are switched at a

preset interval.

In SINGLE MODE, the channel numbers are sequentially switched from

1 to 4.



Preset interval (10 seconds)

•

: When this button is clicked, the previous screen appears.

•

: When this button is clicked, the next screen appears.

In SINGLE MODE, the channel numbers are sequentially switched from

1 to 4.

Summary of Contents for SRD-443












































































































































































Search results

Summary of Contents for SRD-443

Reviews:

Related manuals for SRD-443

Brands by name

Popular brands

Samsung SRD-443, User Manual

Search results

Summary of Contents for SRD-443

Reviews:

Related manuals for SRD-443

Brands by name

Popular brands