Samsung SRD-443 User Manual Download Page 64

Page: 64 / 171

64_

using the DVR

•

Pattern : Makes the PTZ camera remember and follow the past route.



The functions of Auto Pan, Scan and Pattern are supported in the protocols of Samsung, Panasonic and Pelco, and are

different in terms of the name and setting, depending on the protocols of Samsung, Panasonic and Pelco.

(Panasonic : Auto Pan, Sequence, Sort / Pelco : Auto Pan, Frame Scan (Scan), Pattern)



Before entering the PTZ device control mode, set the values of the PTZ device in the <

Setting the PTZ

> menu.

(Page 40)

Preset Setting

A preset is a set of specific target points of a PTZ camera, and up to 20 presets per a camera can be stored.

Using the mouse may help make setup easier.

In PTZ Control mode, use the direction buttons to adjust the camera in a desired direction.

Select the <

Save

> key.

The virtual keyboard for inputting the preset will appear.



Refer to “

Using Virtual Keyboard

”. (Page 30)

•

Save : You can save the preset settings.

•

Rename : You can change the settings of the existing presets.

•

Delete : Deletes the selected preset.

•

Delete All : Deletes all existing presets.



If you replace the camera of the channel that stores the preset list with a new one, you should reset the preset

accordingly.

Press <

The preset will be saved as a name that you entered.

Camera Setting

A PTZ camera has its own menu system. Optimize the PTZ camera according to the DVR.

Using the mouse may help make setup easier.

Connect the PTZ camera to the DVR and run the PTZ camera again to display the camera’s protocol

setting window.

Check the protocol ID of the camera.



In “

Device

Setting the PTZ

”, enter the PTZ camera ID in the ID input box of the channel that is connected to the PTZ

camera. (Page 40)

Select <

Camera Setup

> in the PTZ Control menu.

The camera-specific menu appears.



You can configure the settings of only those cameras that support

the protocols of Samsung, Pelco D/P, AD and Panasonic.



If you are setting Auto Pan or Pattern in the camera menu, press

and hold the appropriate button for a certain time so that the button

operation can be different from that in normal PTZ setting.

2013-01-01 01:10:25

P/T Setting

Pan/Tilt Limit

Area Setting
Area Masking
Prop. P/T

Digital Flip

Image Hold

Jog Speed

MANUAL

Max Speed Level

C a m e r a S e t u p

E x i t

Summary of Contents for SRD-443












































































































































































Search results

Summary of Contents for SRD-443

Reviews:

Related manuals for SRD-443

Brands by name

Popular brands

Samsung SRD-443, User Manual

Search results

Summary of Contents for SRD-443

Reviews:

Related manuals for SRD-443

Brands by name

Popular brands