Samsung SR8940, User Manual

Page: 126 / 196

30_ operating
Spot Cleaning
You can conveniently clean a specifi c area that has a a lot of
cookie crumbs, dust, and etc.
Move the vacuum cleaning robot to the location where you want to
■
perform a spot clean.
Main unit button
Remote control
button
Confi guration
Sequence
Normal Mode Normal Mode
Turbo Mode Turbo Mode
Dust Sensor Mode Dust Sensor Mode
Cleaning Complete Cleaning Complete
2time 2time
▶
Set the mode. 1.
Cancel the mode. 2.
In Spot cleaning mode, the vacuum cleaning robot cleans an area -
with a length of 1.5m and a width of 1.5m.
When cleaning is completed, the vacuum cleaning robot will
-
display End, Stop, and Stand by.
When the vacuum cleaning robot is docked with the charger
station, spot cleaning is not supported.
Each time you press the Turbo button, the Turbo icon on •
the display panel is turned on or off sequentially. When the
Turbo icon is turned on, you can start cleaning in Turbo
mode.
Each time you press the Dust Sensor button, the Dust
•
Sensor icon on the display panel is turned on or off
sequentially. When the Dust Sensor icon is turned on, you
can start cleaning in Dust Sensor mode.
NOTE
CAUTION
About 1.5m About 1.5m
A
b
o
u
t
1
.5
m
About 1.5m
DJ68-00664E.indb 30 DJ68-00664E.indb 30 2012.7.19 11:54:13 AM 2012.7.19 11:54:13 AM