Samsung SR8940, User Manual

Page: 116 / 196

20_ operating
INSTALLING THE VACUUM CLEANING ROBOT
Installation order
Turning the Power Switch on or off 1.
To use the vacuum cleaning robot, you must turn on the Power Switch
at the bottom of the main unit.
Installing the Charger 2.
To charge the vacuum cleaning robot, you must fi rst install the charger.
Since the battery is discharged when the product is purchased, you
must fully charge the battery before use.
Charging the Battery 3.
You should charge the battery completely before using the vacuum
cleaning robot.
Setting the Time 4.
You should set the time to use the scheduled and daily cleaning options.
Installing the VIRTUAL GUARD 5.
You can confi ne the vacuum cleaning robot to a particular section by using Fence (virtual wall)
mode.
Turning the Power Switch on or off
To use the vacuum cleaning robot, you must turn the Power Switch
on.
If you turn off the Power switch, all settings except for the current
time and the Weekly reservations are reset.
If no key is pressed for approximately 1 minute after turning the
❈
power on, the power is automatically cut to prevent the battery
discharging.
To turn the power on again, press and hold the power (Start/
Stop) button on the main body.
Lift the body and turn on the power switch while making 1.
sure not to press any other button.
If the icons are not turned on, it indicates that the battery charge -
is depleted. In this case, dock the vacuum cleaning robot to the
charger station after turning the Power Switch on.
The confi gured time may be different from the current time. If the
-
confi gure time is incorrect, set the time to the current time.
If the Power Switch is turned off, the vacuum cleaning robot will
not be charged even if it is docked with the charger station.
operating the cleaner
CAUTION
DJ68-00664E.indb 20 DJ68-00664E.indb 20 2012.7.19 11:54:8 AM 2012.7.19 11:54:8 AM