VACUUM CLEANER AND BLOWER
Installation, Operation and Maintenance
Unit 17. Millbrook Business Park, Sybron Way • Crowborough, East Sussex TN6 3JZ United Kingdom
Phone: 00 44 (0) 1892-665313 • E-mail:
, Internet:
PPE-5089.E
April 2014 Page 1 of 2
© 2014 CHARLESWATER LTD.
Figure 1.
Vacuum Cleaner
Description
Compact lightweight blower /
vacuum cleaner designed for
precise removal and collection
of dry dust particles and debris
from electrostatic static sensitive
devices (ESDS). The conductive
nozzles drain-off any static
build-up to earth.
In order to comply with
EN 61340-5-1 recommendations
for working in an ESD protected
area (EPA), the appliance
housing, nozzles, hose, shoulder
strap, cable and accessories are
fully conductive.
The vacuum cleaner can retain
dust and fine dry particles
as small as 0.3 micron, the
vacuum cleaner is fitted with
a double-layer paper filter bag
and an electro-static charged
micro-motor filter.
“Tools intended for use within
the EPA [ESD protected area]
shall, as far as is practicable, be
so constructed that they do not
generate or hold an electrostatic
charge ….All tools and
machinery, for example electrical,
mechanical or pneumatic, shall
be so constructed that any
non-insulating part of the tool
or machine which may touch an
ESDS [ESD sensitive items] shall
be at EPA ground potential.” [EN
61340-5-1 clause 5.2.10 Tools,
machinery, dispensers and test
equipment]
The appliance can also be
converted in seconds into a
powerful blower for dust removal
in areas otherwise not accessible
- the blower’s air-current is
cfc-free and contains no oil or
water residue.
The appliance is constructed to
safety class II: Double insulated
design in compliance with CE
standards.
- Durable and compact design
- Motor has thermal protection
with RFI/EMC filter
- Hose assembly extends to
130cm
- Includes hard crevice and soft
rubber nozzle
- 1.2 l filter bag
- Advanced 5 stage filtration
system
- 3m long power cord
- Conductive carry strap
- Input power supply voltage:
220-240 volts
- Made in the Netherlands
Inspection
Remove the vacuum cleaner
from the carton and inspect for
shipping damages.
Each unit should include the
following:
1 Vacuum Cleaner
1 1.3m Hose
2 Nozzles
1 Carrying Strap
Optional Accessory:
-
: Replacement Bags,
Pack of 10
Operating instructions
1. Push hose end into
suction opening
2. Press the suction nozzle onto
the free suction hose-end
3. Place rocker switch in off
position
4. Set electronic control to
medium power
5. Insert the plug into the
electrical supply and start
appliance, pressing on-off
switch to “on” position.
TECHNICAL BULLETIN PPE-5089.E
Figure 2.
Vacuum Cleaner
If there is substantial loss of
vacuum or blow-pressure, take the
following steps:
1. Remove appliance from
the EPA
2. Check whether nozzle or
suction-hose have become
blocked
3. Switch off appliance and
disconnect plug from
electrical supply
4. Lift metal bottom lock and
remove housing’s front cover
5. Remove and replace the
spent paper filter bag
6. Replace electrostatic micro-
motor filter.
