manualshive.com logo in svg

Samsung SPRINT SPH-i500, Online User'S Manual

Share
Download
Samsung SPRINT SPH-i500 Online User'S Manual Download Page 205

Section 4: Safety Guidelines and Warranty Information

4B: Manufacturer’s Warranty 202

Operating Systems

Question:

 Can I set up new entries or modify the existing entry in the 

Palm OS

®

 Network Panel?

Answer:

 NO! Access to the Internet is via the Sprint PCS Vision network; 

the setup/configuration in the Sprint PCS Network Panel entry should 
not be modified in any way, or else you may no longer be able to access 
the network. Please note that if you change your Vision password on the 
Sprint PCS website, the password in the Network Panel is automatically 
updated wirelessly! Unlike previous Palm OS devices, any devices enabled 
on the PCS Vision network cannot dial out through the network, so 
although it is physically possible to set up a different network connection 
on the device, you will not be able to access it.

Question:

 Can I use this with my Macintosh computer?

Answer:

 The i500 is not supported for use with Macintosh computers.

Question:

 Does this work with Windows 95, 98, XP, or 2000?

Answer:

 Yes. Make sure that Palm

TM

 OS version 4.1 is installed. Prior 

versions of the Palm desktop will not operate correctly with the platforms.

Question:

 I get an error message about not having the proper rights to 

perform this function when using Windows XP or 2000?

Answer:

 In Windows XP and 2000 you must have “Standard User 

Rights”. If you are working on a network, please see your IT department 
or consult the Microsoft documentation for more information. 

Question:

 I am having problems when trying to install a USB device or a 

USB device is not recognized.

Answer:

 Depending on the Windows version being used, you may or 

may not see a window display when you plug in the USB interface cord. If 
the USB cradle was plugged in before the drivers were installed, you must 
remove the incorrect driver. To make sure that there are no problems, you 
must look at the system devices to make sure that there are no devices 
that are conflicting with on another. To check, follow the steps listed 
below:

1.

Click on Start/Settings/Control Panel.

2.

Double click on the System icon.

Summary of Contents for SPRINT SPH-i500


























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands