manualshive.com logo in svg

Samsung SPRINT SPH-i500, Online User'S Manual

Share
Download
Samsung SPRINT SPH-i500 Online User'S Manual Download Page 188

Section 4: Safety Guidelines and Warranty Information

4A: Safety 185

Caring for the Battery

Protecting Your Battery

The guidelines listed below help you get the most out of your
battery’s performance.

䊳

Use only Sprint-approved batteries and desktop chargers. These 
chargers are designed to maximize battery life. Using other batteries 
or chargers voids your warranty and may cause damage.

䊳

In order to avoid damage, charge the battery only in temperatures 
that range from 32º F to 104º F (0º C to 40º C).

䊳

Don’t use the battery charger in direct sunlight or in high humidity 
areas, such as the bathroom.

䊳

Never dispose of the battery by incineration.

䊳

Keep the metal contacts on top of the battery clean.

䊳

Don’t attempt to disassemble or short-circuit the battery.

䊳

The battery may need recharging if it has not been used for a long 
period of time.

䊳

It’s best to replace the battery when it no longer provides acceptable 
performance. It can be recharged hundreds of times before it needs 
replacing.

䊳

Don’t store the battery in high temperature areas for long periods of 
time. It’s best to follow these storage rules:

Less than one month:
4º F to 140º F (-20º C to 60º C)

More than one month:
4º F to 113º F (-20º C to 45º C)

Disposal of Lithium Ion (LiIon) Batteries

For safe disposal options of your LiIon batteries, contact your nearest 
Sprint-authorized service center.

Special Note

: Be sure to dispose of your battery properly. In some areas, 

the disposal of batteries in household or business trash may be 
prohibited.

Note: 

For safety, do not handle a damaged or leaking LiIon battery.

Summary of Contents for SPRINT SPH-i500


























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands