79
Call Block
Call Block lets you control which incoming calls, if any, you wish to receive. Using
Call Block you can elect to ignore a List of specified numbers, or to ignore calls
received from specified Contact Group(s).
1.
In standby mode, press the
Menu
(left) soft touch key (
), then press
(for
CUSTOMIZE
),
(for
Settings
),
(for
Call
), and
for
Call Block
. You’re prompted to enter the password for your device.
Note:
The default password is ‘0000’.
The following options appear in the display:
• Settings
— Lets you enable/disable Call Block, selet a Block Mode, and/or
assign a Sound Effect to ignored calls.
• Blocked List
— Lets you review and manage the list of Saved Numbers you
selected in the Call Log (see
“Calls Log”
on page 27 for more information) or
entered directly using Set Number.
• Blocked Group
— Lets you ignore calls from one or more Contact Groups.
Tone Length
Use this menu to set DTMF settings to
Short
or
Long
.
1.
In standby mode, press the
Menu
(left) soft touch key (
), then press
(for
CUSTOMIZE
),
(for
Settings
),
(for
Call
), and
for
Tone Length
.The following options appear in the display:
• Short
— Select for a brief tone
• Long
— Select for an extended tone
2.
Use the Up and Down navigation keys to highlight the Tone Length setting
of your choice, then press
. Your setting is saved.
Network
1.
In standby mode, press the
Menu
(left) soft touch key (
), then press
(for
CUSTOMIZE
),
(for
Settings
), and
for
Network
.The
following options pop-up in the display:
• 3G mode
• 1X only
2.
Use the navigation keys to highlight the method you wish to use for data
transfer, then press the
key.
