60
System
Changing PIN
(Personal Identification Number)
(Menu 6-4)
The PIN is required when you access
System
menus. The PIN
is preset to ‘0000’ at factory. You can change the PIN code.
1. In the Standby mode, press the
Menu
soft key.
2. Press the
soft key repeatedly until
System
appears,
then press the
Select
soft key.
3. Enter the PIN code, then press the
OK
soft key.
4. Press the
soft key repeatedly until
Change PIN
appears, then press the
Select
soft key.
5.
New PIN [ ]
is displayed. Enter a new PIN code, then
press the
OK
soft key. The LCD window does not display
the PIN code you entered in order to maintain secrecy.
Note:
It must be 4 digits. If you make a mistake, you can
c o rrect the number by using the
k e y.
6. Enter the new PIN code again to confirm the number, then
press the
OK
soft key.
N o t e s
:
• If you enter a diff e rent number from the new code, the
phone sounds an error beep, and re t u rns to the pre v i o u s
s c re e n .
• If you change the PIN code and then forget it, you will have
to contact your local service center.
• If you want to exit from the Change PIN mode while chang-
ing PIN, press the
E x i t
soft key.
