Samsung SP-R6100 User Manual Download Page 59

Page: 59 / 67

System

1. In the Standby mode, press the

Menu

soft key.

2. Press the

soft key repeatedly until

System

appears,

then press the

Select

soft key.

3. Enter the PIN code, then press the

soft key.

4. Press the

soft key repeatedly until

Remove Handset

appears, then press the

Select

soft key.

5. The selected base number to which your handset is current-

ly registered appears. Press the

Yes

soft key.

6. When the handset is properly removed,

Fail to Register

displayed. Now, you cannot use the handset with the base
unit unless you register the handset back to it.

N o t e

: If the handset is re g i s t e red to more than one base unit,

and you want to use the handset with other base units,
you have to choose one of the other bases available.
Refer to ‘Selecting Base Manually’ on page 64.

Removing a Handset

(Menu 6-3)

Summary of Contents for SP-R6100




































































Search results

Summary of Contents for SP-R6100

Reviews:

Related manuals for SP-R6100

Brands by name

Popular brands

Samsung SP-R6100, User Manual

Search results

Summary of Contents for SP-R6100

Reviews:

Related manuals for SP-R6100

Brands by name

Popular brands