COLOR CCD CAMERA
COLOR CCD CAMERA
User’s Manual
User’s Manual
11
10
Back
Video Out Jack
Connect to the video input connector of monitor. This jack outputs a
composite video signal. Use a coaxial cable for connection.
DC Level Adjustment V.R
Used to adjust video output level of DC driven auto iris lens. When the
brightness control of the monitor does not operate correctly, you can get the
optimum picture by controlling the DC level of camera.
V. PHASE Adjustment V.R: AC type
If the camera is to be used in the LL mode, the vertical phase may require
adjustment to synchronize the vertical phase of the camera with other camera
in the system. Make this adjustment when the vertical phase of the camera
does not match with other cameras or systems. For correct adjustment, use a
multi - channel oscilloscope. The V. PHASE adjustment can be readjusted.
Power Input Terminal
Used to connect AC/DC power source.
Power Lamp
The power lamp turns on when power is properly supplied.
Function Selection Switch
(1) BLC(Backlight Compensation) ON/OFF Switch
This switch improves an image that is darkened because of backlighting.
When the lighting source is in the rear of an object, the object might be seen
somewhat dark. If you want to see the object clearly, turn this switch ON.
The effective area where backlight compensation is activate is fixed in the
center of the screen.
Monitor Picture
Adjustment direction
To make it brighter
Turn clockwise
Monitor Picture
Adjustment direction
To make it darker
Turn counterclockwise
• This adjustment is necessary only when linelock is performed.
• There is no V. PHASE adjustment VR on the rear of DC power type.
Notes
Name and Function of Each Part
* Use the select switches on the rear of camera.
* This diagram is based on SOC-4020Series
