COLOR CCD CAMERA
COLOR CCD CAMERA
User’s Manual
User’s Manual
15
14
Connection
LENS
The DC lens is supplied with this camera.
• If the lens is marked with fingerprints or other marks, the image quality might be poor.
• It is recommended to use the built-in iris lens to improve the image quality under low
illumination.
Notes
Connect the VIDEO out jack to the monitor video in jack.
Connecting to Monitor
CCD Camera
Monitor
• As the connecting method varies with the instruments, refer to the manual
supplied with the instrument.
• Connect the cable after power is turned off.
• Set the 75
Ω
/ Hi-Z selection switch as shown below if you have an intermediate device.
CCD Camera
Intermediate
End monitor
Connecting to Power
Each model has different power specification, please check the name of the model
and power specification before connecting to power source.
Please refer to the sticker identifying the model, which is attached on the product,
for power specification.
• The wire is polarized. Be careful of polarity.
• Use DC 12V power source for SOC-4020SERIES
Resistance of copper wire [at 20C˚ (68˚F)]
• As voltage may drop according to the length of electric cord as above table, a
camera may malfunction if too long output line of adaptor is connected to the
camera.
* Voltage for camera operation: DC 12V ± 10%
* Voltage drops on above table are variable according to types of electric cord and makers.
For DC Power Type
Copper wire size (AWG)
#24(0.22mm
2
)
#22(0.33mm
2
)
#20(0.52mm
2
)
#18(0.83mm
2
)
Resistance (
Ω
/ m)
0.078
0.050
0.030
0.018
Voltage Drop (V/m)
0.028
0.018
0.011
0.006
