manualshive.com logo in svg

Samsung SNT-1010, User Manual

Share
Download
Samsung SNT-1010 User Manual Download Page 42

83

Specifications

Chapter 9 Appendix

Trouble-shooting/Specifications

Appendix

Trouble-shooting 

(Continued)

Appendix

82

I can’t control over the PTZ device

First, check the settings of <SETUP> 

<SYSTEM> 

<RS485>.

Refer to the user guide of the external device connected to SNT-1010 for correct settings.

The menu of the external PTZ device appears somewhat later. 
Or, the response from the external PTZ is delayed when I manipulate it.

The amount of data is comparatively great considering the network transfer rate.

In <SETUP> 

<BASIC CONFIGURATION> 

<VIDEO> set the <Resolution> to <CIF> or, the <Low>.

When my SNT-1010 has restarted, the [Status] indicator still stays red.

First, check the settings of <SETUP> 

<SYSTEM> 

<DATE/TIME>. 

This is due to a connection failure to the NTP server. So It couldn’t display the time information.

I have selected Set in the IP Installer list and pressed the [Manual Set] button. But I couldn’t
change the IP address and port number.

Check the [IP Type ] switch on the front panel for the position. 

If the switch is positioned to [D], this is in Dynamic IP mode.
In this case, the IP address and port number are allocated by DHCP, which you can’t change.

For [Auto Set], why the IP address and port number are changed when the port
mapping has failed?

[Auto Set ] will perform both the IP and Port setting and [Port Mapping ].
You can change the IP address and port number, regardless of the [Port Mapping] results.

The port mapping for both [Auto Set] and [Manual Set] does not work.

Check the current IP sharer for compatibility with SNT-1010.(see page 5)

If your IP sharer is listed in the list, check if the UPnP check box is selected on the main 
menu window of the sharer (normally, 192.168.1.1).

If not listed, check your IP sharer for UPnP accessibility and if the problem persists, replace it with one in the list.

When I connect SNT-1010 to the power source, the status indicator keeps blinking in red and I
can’t connect to the network using the browser.

If SNT--1010 fails to connect to the set NTP server,it attempts to connect to other NTP servers.So if

the IP settings of the SNT-1010 are incorrectly configured or the network environments are not in
normal conditions,it will take as long as several minutes to restart the SNT-1010.
You can access the network when the status indicator turns into red or green.

OS

Browser

DirectX

CPU Hardware

Network

Video

Audio

Compression

Video resolution

Frame Rate

Video Quality 

Motion Detection

Alarm I/O

Alarm Event

SNT-1010

PC

Physical layer

Network Protocol

Streaming

UPnP

DDNS

IN

OUT

connector

Input/Output

Bidirectional audio

Video
Audio

NTSC

PAL

NTSC

PAL

10/100BASE-T

TCP, UDP, NTP, HTTP, DHCP,

TCP, UDP(Unicast, Multicast)

Supporting Auto Network Configuration

Supporting Samsung DDNS and Public DDNS servers

Composite 1 Channel

1 BNC (Loop Through Out)

- Auto Termination

3.5 mm jacks

Mono 1 chanel / Mono 1 channel,

Full duplex Supporting

MPEG-4, M-JPEG

G.711, 64kbps 8kHz sampling

D1

VGA

CIF

QCIF

D1

VGA

CIF

QCIF

720x480
640x480
352x240
176x112
720x576
640x576
352x288
176x144

30, 15, 7.5, 3, 1 FPS

25, 12.5, 6.25, 3, 1 FPS

Quality

Sensitivity

Alarm Input

Video Loss

Motion Detection

Schedule

Very High, High, Normal, Low, Very Low

High, Medium, Low

Image transfer : FTP, E-mail

Notification :notify to viewer and file server Alarm Out

Image transfer : FTP, E-mail

Notification :notify to viewer and file server Alarm Out

Image transfer : FTP, E-mail

Notification :notify to viewer and file server Alarm Out

Image transfer : FTP, E-mail

Input :4 Input (5 mA sink)

Output 1 (24VDC 40mA Max)

Relay OUT (30VDC 2A,125VAC 0.5A Max)

Internet Explorer 5.0 or Higher

DirectX 8.1 or Higher

32bit RSIC

Flash 16Mbyte

SDRAM 32Mbyte

Embedded Linux

Windows XP / Windows 2000 Professional

Summary of Contents for SNT-1010




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands