43
Chapter 7 Using SNT-1010
Connecting to SNT-1010/Installing ActiveX
For Windows XP Service Pack 2
1
If the following screen appears, click the
Install button.
2
Click the <Install ActiveX Control>.
3
If the Security Warning window appears,
click the [Install] button.
42
If you connect the SNT-101 to the Internet and configure the network
settings, you can monitor the picture of the connected camera in real-time.
Using SNT-1010
Installing ActiveX
For Windows 2000/Windows XP
If the Security Warning window appears,
click the Yes button.
1
Type
root
in the <User ID>input box.
2
Type
4321
in the <Password> input box.
If you have changed the old password, type the new
password here.
3
Click the [Log In] button.
When the login is complete, the SNT-1010 Viewer
screen appears.
To login
For the first login, the user ID is
root
and password is
4321
.
For the security purposes, make sure to change the password by clicking <BASIC CONFIGURATION>
<USER> in the SETUP screen. The administrator ID,
root
is fixed and cannot be changed.
If you select the <Save ID> check box, the user ID is saved and will be entered automatically in the following logins.
Note
If you have not installed DirectX 8.1 or later on your Windows 2000-based PC and try to log in, you may not
see any video image on the screen.
Note
1
2
3
Using SNT-1010
Connecting to SNT-1010
(Continued)
If you have not installed DirectX 8.1 or later on your Windows 2000-based PC and try to log in, you may not
see any video image on the screen.
You are required to install DirectX 8.1 or later on your Windows-based PC.
You can download DirectX for free at http://www.microsoft.com/download
Notice
