Samsung SiPTel C01 User Manual Download Page 9

Page: 9 / 46

SiPTel C01 IP Phone User Manual

Status

Flashing : Trying to find the Gatekeeper.
Constant : Registered with Gatekeeper successfully.

Call status
display

: Displayed when the call is connected successfully.
: Displayed when the call isn’t connected.

Kinds of
connection

: Static IP

: DHCP

: PPPoE

Mute

Displayed when using Mute function.

Flash save
display

Displayed when data is being saved in memory

Ethernet

Displayed when the SiPTel IP Phone is connected to the Internet

thru Ethernet cable.

Modem

Displayed when the SiPTel IP Phone is connected to Internet thru

the Modem.

Summer Time

Displayed when the summer time is applied.

Entry mode

Displays the input mode.

: Symbols
: English Lower Case
: English Capital
: Numeric

Navigation key

Displayed only when the navigation key is available for menu

selection.

1.4.3.

LED Display

PSTN

Glows when using PSTN mode.

@ISP

Glows when using Dial-up connection.

1.4.4.

Port Structure

POWER

Use to connect to the power adapter.

ETHERNET

Use to connect to Internet leased line, cable modem, ADSL Modem, or etc. for

internet connection.

LINE

Use to connect to the regular telephone line.

Figure 2) SiPTel IP Phone Rear Panel

Summary of Contents for SiPTel C01















































Search results

Summary of Contents for SiPTel C01

Reviews:

Related manuals for SiPTel C01

Brands by name

Popular brands

Samsung SiPTel C01, User Manual

Search results

Summary of Contents for SiPTel C01

Reviews:

Related manuals for SiPTel C01

Brands by name

Popular brands