Samsung SiPTel C01 User Manual Download Page 41

Page: 41 / 46

SiPTel C01 IP Phone User Manual

STEP 2

You will see following screen while it attempts to get your account balance.

It may take few seconds depending on the speed of internet to get

the account balance.

Please wait for a moment.

STEP 4

You will see the account balance there after.

It displays your account balance after “USD: “

Press Cancel to go back to main menu.

4.7.

Reboot

This menu is used to reboot the system.

STEP 1

Select ‘7: Reboot’ in the MAIN menu selection.

Use navigation key or press the menu number to select the menu.

Press ‘Cancel’ key to return to the initial display.

STEP 2

If you want to reboot SiPTel IP Phone, select ‘YES’, and press ‘OK’ .

Use navigation key to select ‘YES’ or ‘NO’.

Press ‘Cancel’ key to return to the initial display.

<Menu>
6: BALANCE

7: Reboot

Reboot System?

YES

<Account>
BALANCE:
WAIT A MOMENT

<Account>
BALANCE:
USD 10.02

Summary of Contents for SiPTel C01















































Search results

Summary of Contents for SiPTel C01

Reviews:

Related manuals for SiPTel C01

Brands by name

Popular brands

Samsung SiPTel C01, User Manual

Search results

Summary of Contents for SiPTel C01

Reviews:

Related manuals for SiPTel C01

Brands by name

Popular brands