Samsung SiPTel C01 User Manual Download Page 39

Page: 39 / 46

SiPTel C01 IP Phone User Manual

STEP 5

You can see the SiPTel IP Phone IP information in the second information display.

Use navigation key to see the next information.

Press ‘Cancel’ key to return to the upper menu.

STEP 6

You can see the subnet mask information in the third information display.

Use navigation key to see the next information.

Press ‘Cancel’ key to return to the upper menu.

STEP 7

You can see the gateway address information in fourth information display.

Use navigation key to see the next information.

Press ‘Cancel’ key to return to the upper menu.

STEP 8

You can see the DNS address information in the fifth information display.

Use navigation key to see the next information.

Press ‘Cancel’ key to return to the upper menu.

4.5.2.

Version

Version information is important especially when upgrading the firmware to the latest version. If you have

any problem in the SiPTel IP Phone, please report the version information, and the IP address of the

phone to the service provider.

STEP 1

Press ‘Menu’ button on the key pad of SiPTel IP Phone.

<Info. #2>
IP
XXX.XXX.XXX.XXX

<Info. #3>
Subnet Mask
XXX.XXX.XXX.XXX

<Info. #4>
Gateway
XXX.XXX.XXX.XXX

<Info. #5/6/7>
DNS1/2/3
XXX.XXX.XXX.XXX

Summary of Contents for SiPTel C01















































Search results

Summary of Contents for SiPTel C01

Reviews:

Related manuals for SiPTel C01

Brands by name

Popular brands

Samsung SiPTel C01, User Manual

Search results

Summary of Contents for SiPTel C01

Reviews:

Related manuals for SiPTel C01

Brands by name

Popular brands