English
_8
To make adjustment using the signal sound
Turn on the DIP Switch #3 of the receiver.
Select one of 3-sound level outputs.
Realign/Poor: Beep-beep-beep
Fair: Beep-beep-beep-beep-beep
Good/Excellent: Beep~~~~~~~~~~~~
After the adjustment, make sure to turn off the switch.
To make adjustment using the voltmeter
Make adjustment as necessary using the voltmeter.
Measure the output volt at DC 10V DC.
Insert the test probe.
It is labeled in either “
Monitor
”.
Check the product status according to the voltage.
Measured Voltage
Alignment
2.5V or higher
Excellent
0.5V ~ 2.4V
Good
0.5V or lower
Poor, to be adjusted
1.
-
-
-
2.
1.
2.
3.
Voltmeter
(10V DC)
Z6806119901A-SIA-0100Q,0200Q.ind8 8
Z6806119901A-SIA-0100Q,0200Q.ind8 8
2010-06-09 오후 2:04:46
2010-06-09 오후 2:04:46
