English
_7
This is the completion of the bracket connection.
To mount on the wall
Use the wall-mount screws (4x16) for this purpose.
Arrange the cables through the wiring hole, and mount the sensor onto
the wall using the sensor screws as shown.
Adjusting the beam
To make adjustment using the view fi nder
This is the fi rst mandatory step for the beam adjustment
that adjusts the sensor position roughly.
Ensure that you can see the other sensor with the
naked eye.
Adjust the position so that the sensor is located at
the center.
3.
1.
1.
2.
Side View
Rear View
Sensor Fixing Bolt
Wiring Hole
Up/Down Adjustable Bolt
Left/right Fine-Tuning Bolt
Left/Right Adjustable Dial
Z6806119901A-SIA-0100Q,0200Q.ind7 7
Z6806119901A-SIA-0100Q,0200Q.ind7 7
2010-06-09 오후 2:04:45
2010-06-09 오후 2:04:45
