Smart Viewer
_55
10 Smart V
iewer
If you have selected
Use DDNS
in the
Network Settings menu of DVR or used an IP
splitter to register a URL using DDNS, you can
connect through the designated URL.
If you want to connect through the URL,
select
URL
in
Address Type
and enter the
URL set in
URL
.
Set the port number in
Port No
. so that it
matches the port number that you’ve set in the
network menu of DVR.
The MAC address of DVR is written on
the side label of the product. It is also
found in the system information on the
DVR setup menu.
If the DVR is connected to ADSL, a
low network bandwidth is available.
Accordingly, the transfer rate becomes
low and Smart Viewer limitedly
operates.
Smart Viewer can monitor up to 16
channels at the same time.
Smart Viewer can search or play one
channel only.
The audio does not play.
The playback frame speed is 0.5 ips in
average and it may vary depending on
the number of channels and video size.
To delete an existing DVR, click
Delete
.
To delete a DVR from the list, click
Delete
. Then
the following message appears. Click
OK
to
confirm it.
When the DVR to be deleted is connected
to Smart Viewer, the following message also
appears. If you really want to delete the DVR,
disconnect the DVR and retry to delete it.
To edit the existing DVR, click
Modify
.
After modifying the settings, click
OK
.
When the DVR to be modified is connected to
Smart Viewer, the following message appears.
If you really want to modify the DVR, disconnect
the DVR and retry to modify it.
Site List
You can assign multiple DVRs (up to 9) to a
site for control. You can register a new site and
delete or edit the selected site in the registered
list. After sites are correctly constructed, you can
add or delete DVRs for the selected site.
To add a new site, click
New
.
After pressing
New
, the following window
appears. You can enter the name of site and
click
OK
.
SHR-5162_Eng.indb 55
2007-06-18 ｿﾀﾀ・11:49:55
